Ribbed CS20, CS24, CS26
Midland’s quality constructed 2″ ribbed commercial steel overhead door combines quality, good looks, and value. Midland’s CS20, CS24, and CS26 offer outstanding performance at a very affordable price. Our state of the art roll formed manufacturing process adds strength that will last for years to come.
When you choose a Midland overhead door you can be confident that you have chosen the best overhead door that money can buy!
- Available in 20 ga., 24 ga.,and 26 ga. steel.
- Embossed pebble-grained texture.
- Available with many window glass options including the Full Vision design as pictured.
- Available as an insulated or a non-insulated garage door.
- Available in White and Brown (CS26).
- Available in White, Brown and Sandtone (CS24).
- Availabe in White only (CS20).
- Work Included
The doors will be Model CS20, CS24 or CS26 sectional overhead type as manufactured by Midland Garage Door Mfg. Co.
- Other Work
Related structure work, opening preparation, field painting and electrical work etc. falls into the responsibility of other trades.
- Work Included
Sections will be 20, 24 or 26 ga. roll formed, hot dipped, galvanized G60 (minimum) a yield strength of 33,000 psi, complying with ASTM A 653 and ASTM A 924, and will have a nominal thickness of 2″ doors will have tongue and groove meeting rails to form weather tight joints. Center and end stiles will be 16 ga. steel riveted to the sections, (26 ga., has 18 ga. center styles, 16 ga. end styles, and are glued and toggle locked to the sections). End stiles will be channel shaped to 2″ deep. Various back covers available. Deflection of door in the horizontal position will not exceed 1/120 of the door width, please consult factory for unusual requirements. Optional glass lites or full vision sections available.
- Insulation (Optional)*
Insulation will be composed of polystyrene providing an insulation factor of 7.0 R-Value
Hinges and fixtures will be G60 galvanized steel complying with ASTM A 36 and ASTM A 123. Full floating ball bearing rollers will have hardened steel races. Roller sizes will be adequate for design requirements and limitations.
Track is 2″ or 3″ depending upon door size and requirements. Angle or bracket mounted depending upon door size and requirements.
- Spring Counterbalance
Counterbalance shall be oil tempered, helical wound torsion springs mounted on a ball bearing cross header shaft engineered to comply with ANSI/DASMA 102-1996. Longer Life springs of 25,000, 50,000 or 100,000 cycles may be specified. Galvanized aircraft type lifting cables with minimum safety factor of 8 to 1 and cast aluminum drums are standard.
Lock will be interior mounted slide lock.
(Optional keyed lock available.)
- Weather strip
Bottom weather strip will be flexible U’d astragal secured with an extruded aluminum retainer which also provides additional reinforcement. Optional jamb weatherstrip packages available.
F/CR paint will be baked-on polyester over epoxy primer in White and brown exterior color. (CS 20 White only exterior color). Please visit your Midland authorized dealer for warranty information on our F/CR paint.
Operation will be by manual pull rope. Optional chain hoist and electric operator are available
Doors should be installed in compliance with Midland Garage Door Mfg. Co. instructions by an authorized Midland Garage Door installation professionals.